Media centres • streamer build hat problem

my plan was to build a raspberry pi streamer but having troubles putting the following parts together :

- raspberry pi 5
- m2 hat ssd hat raspberry pi
- hifiberry digi2 pro 2.2 hat

So now the m2.ssd hat is on top of the raspberry pi 5 board and i notice it is not possible to prick
the hifiberry (on top ) in de m2 hat + board because it has no outstanding pins (gpio)

So now or
1. i can dissemble the m2 ssd hat and just use an sd card instead.
or
2. there must be some kind of solution. F.i. a connector that can connect the m2 ssd hat with the digihat2 pro.

Do you guys perhaps have any suggestions ?

Statistics: Posted by Onq28 — Sun Mar 23, 2025 2:17 pm

---