OK, I believe I fixed it to look like this. Still not working when I run a i2cdetect. Did enable i2c interface, and rebooted.Wiring looks wrong Note: physical pin numbers used.Code:
1 - VCC : OK 3V35 - SCL : OK SCL GPIO317 - CS : ?? should be not connected "NC"21- ADDR: ?? GPIO9 SPI MISO (high addr is 0x77, low addr is 0x76 - connect it to GND6 - GND : OK GND20 - SDA - ?? physical pin 20 is GND, this should be 3 (GPIO2) i.e. SDA
Statistics: Posted by droidus — Fri Dec 27, 2024 9:38 pm